| All News | | | Boards | | | Chips | | | Devices | | | Software | | | LinuxDevices.com Archive | | | About | | | Contact | | | Subscribe |
|
|
|
|
Makerfabs has showcased an nRF52840 development board combining Bluetooth connectivity with a DW3000-series ultra-wideband radio for ranging and positioning applications. The board includes a 1.3-inch OLED display, dual USB Type-C connections, LiPo battery support, a fuel gauge, and expansion headers, while accompanying Arduino examples cover single- and multi-node UWB ranging.
Boardcon’s CM311Y3 system-on-module and accompanying Idea311Y3 development board are based on the Amlogic A311Y3 processor. The platform provides an 8-TOPS NPU, up to 16GB of LPDDR5/LPDDR5X memory, PCIe 3.0 storage expansion, dual Gigabit Ethernet, HDMI input and output, and multiple MIPI camera and display interfaces.
Following the recent launch of the Arduino Ventuno Q, Toradex has introduced the Aquila IQ8, its first Qualcomm Dragonwing-based System on Module. Built around the same IQ-8275 processor, the module targets industrial edge AI, robotics, computer vision, and other compute-intensive embedded applications.
Arduino recently opened pre-orders for the Ventuno Q, a dual-processor development board designed for edge AI, robotics, computer vision, and industrial applications. The platform pairs a Qualcomm Dragonwing IQ8 application processor with an STM32H5 microcontroller and ships with Ubuntu pre-installed alongside Arduino’s App Lab development environment.
Radxa has recently published additional hardware details for the C201, a 120 × 120mm carrier board designed for its compute module based on Qualcomm’s Dragonwing IQ-9075 platform. The board provides access to the module’s high-speed interfaces through dual 2.5GbE, NVMe storage, camera support, as well as RS-232, RS-485, and CAN bus connectivity.
Orange Pi has shown the Orange Pi Zero 4, a compact single-board computer based on the Allwinner A733 SoC. The board combines an octa-core Arm CPU, a PowerVR GPU, a 3 TOPS NPU, up to 16GB of LPDDR5/LPDDR4X/LPDDR4 memory, Gigabit Ethernet, Wi-Fi 6, Bluetooth 5.4, and multiple display and camera interfaces in a 50 x 55mm form factor.
NVIDIA has announced the Jetson Orin Nano 2, an updated edge AI platform aimed at robotics, drones, machine vision, and other embedded AI applications. The new module provides up to 78 TOPS of AI performance, 8GB of memory, and an 8-core Arm CPU while retaining the compact form factor of the previous Jetson Orin Nano generation.
The NanoPi R28S is a compact networking-focused Linux board based on the Rockchip RK3528A from FriendlyELEC. The 45 × 45mm platform provides dual Gigabit Ethernet, Wi-Fi 6, Bluetooth 5.3, microSD storage, optional eMMC, and dual USB-C ports, with support for several Linux-based operating systems.
M5Stack’s new PaperMono and PaperMono-Lite are compact ESP32-S3-based e-paper development platforms built around a 3.97-inch grayscale touchscreen. Both models include Wi-Fi, microSD storage, an IMU, real-time clock, frontlight, microphone, buzzer, and an integrated 1150mAh battery, while the higher-end PaperMono adds LoRa and NFC connectivity.
LILYGO has updated its T-Display K230 handheld, packaging its Kendryte K230-based development platform into a compact enclosure with a physical keyboard. The device combines dual-core 64-bit RISC-V processing with a 4.1-inch AMOLED touchscreen, LoRa, Wi-Fi, Ethernet, camera support, HDMI output, and an nRF52840 companion microcontroller.
IEI has detailed the NANO-X100, a compact EPIC single-board computer based on AMD’s Ryzen AI Embedded X100 Series. The 115 × 165mm board integrates 64GB of LPDDR5X memory, dual 2.5GbE networking, three M.2 expansion slots, four USB 3.2 ports, HDMI and DisplayPort outputs, and multiple serial interfaces for embedded and industrial applications.
DFRobot is offering two MXM GPU Carrier Board Kits for the LattePanda Mu compute module, with configurations based on either an Intel Arc A380 or NVIDIA GeForce RTX 3060 MXM graphics card. Both kits support up to six independent 4K displays, Gigabit Ethernet, USB 3.2 Gen2, M.2 expansion, and LattePanda Mu compute modules.
EDATEC’s ED-CLAWBOX is a compact edge AI system based on the Raspberry Pi Compute Module 5. The aluminum desktop system is designed for local OpenClaw deployment and provides Gigabit Ethernet, dual-band Wi-Fi, Bluetooth, dual HDMI outputs, USB 3.0 connectivity, mSATA expansion, integrated audio, and a preinstalled JishuShell management environment.
The Luckfox Lyra PLC is a compact Linux-based programmable logic controller built around the Rockchip RK3506B processor. The DIN-rail system provides dual 100Mbps Ethernet, Wi-Fi 6, Bluetooth 5.2, industrial serial interfaces, CAN, relay outputs, and a 1.9-inch touchscreen.