All News | Boards | Chips | Devices | Software | LinuxDevices.com Archive | About | Contact | Subscribe
Follow LinuxGizmos:
Twitter Facebook Pinterest RSS feed
*   get email updates   *

XIAO Series Adopts Nordic nRF54L15 SoC with BLE 6.0 and Low Power Operation

Aug 6, 2025 — by Giorgio Mendoza 180 views

Seeed Studio has introduced the XIAO nRF54L15 and XIAO nRF54L15 Sense, two compact boards based on Nordic’s nRF54L15 SoC. They support BLE 6.0, Matter, Thread, and other 2.4 GHz protocols, with potential use in wearables, sensors, and prototypes.

Both boards feature a 128 MHz Arm Cortex-M33 core paired with a RISC-V coprocessor, along with 1.5 MB of non-volatile memory and 256 KB of RAM. The form factor remains compact at 21 × 17.8 mm, and includes USB Type-C, 16 GPIOs, an onboard charging circuit, and NFC support.

— ADVERTISEMENT —


Antenna options include an onboard ceramic antenna and an IPEX connector for external antennas. The Sense variant adds a 6-axis IMU and PDM microphone for motion and audio input.

XIAO nRF54L15 Peripherals
(click image to enlarge)

According to the preliminary datasheet for the nRF54L15, the SoC includes a multiprotocol 2.4 GHz radio with receive sensitivity down to –104 dBm in long-range BLE mode and output power configurable up to +8 dBm. Supported data rates range from 125 kbps to 4 Mbps, depending on the protocol.

XIAO nRF54L15 Pinout
(click image to enlarge)

Security features include TrustZone, secure boot, firmware protection, secure key management, debug access control, cryptographic acceleration with side-channel resistance, and tamper detection. A global RTC remains active in low-power modes, including System OFF, which operates at a current of 600 nA. Final board-level power measurements are still pending.

XIAO nRF54L15 Banner
(click image to enlarge)

Development is supported via the Nordic nRF Connect SDK, PlatformIO, and Zephyr RTOS. Arduino IDE is not supported at the time of publication. The modules feature a surface-mount design with standardized stamp holes and are compatible with Seeed’s Fusion PCBA service and Open Parts Library.

Further Information

The XIAO nRF54L15 is priced at $9.99, and the Sense version is available at $15.90, both with unsoldered pins. Pre-soldered versions are offered at $10.99 and $17.99, respectively.

(advertise here)


PLEASE COMMENT BELOW

Please comment here...