All News | Boards | Chips | Devices | Software | LinuxDevices.com Archive | About | Contact | Subscribe
Follow LinuxGizmos:
Twitter Facebook Pinterest RSS feed
*   get email updates   *

Touchscreen Smart Box Based on ESP32-P4 with Wi-Fi 6 or Ethernet

May 31, 2025 — by Giorgio Mendoza 868 views

The ESP32-P4 Smart 86 Box is a compact development board with a 4-inch capacitive touchscreen, designed for HMI, smart control panels, and edge processing. Its 86 mm form factor allows it to be easily installed in wall-mounted enclosures for use in embedded automation and smart terminal applications.

As the name implies, this board is built around the ESP32-P4 SoC, which integrates RISC-V 32-bit dual-core and single-core processors. It includes 128 KB of high-performance ROM, 768 KB of L2 memory, 32 KB of low-power SRAM, and 8 KB of tightly coupled memory.

— ADVERTISEMENT —



ESP32-P4 Block Diagram
(click image to enlarge)

Hardware resources include 32 MB of onboard PSRAM and 32 MB of NOR Flash. The display is a 4-inch 720 × 720 IPS panel with 400 cd/m² brightness, a 1200:1 contrast ratio, and a 170° viewing angle. The GT911 touch controller supports 5-point capacitive touch input. Audio is supported by an ES8311 low-power codec and an ES7210 echo cancellation chip, along with onboard dual microphones and a speaker header.

Peripheral interfaces include MIPI-CSI and MIPI-DSI, USB OTG 2.0, a MicroSD card slot using SDIO 3.0, and support for MIPI 2-lane camera input. The ESP32-P4-WIFI6-Touch-LCD-4B variant includes these standard features. The ESP32-P4-86-Panel-ETH-2RO model adds a 10/100 Mbps Ethernet port, RS485 interface with isolation, and two optocoupler-isolated relay channels rated at up to 10 A at 250 V AC or 30 V DC.


ESP32-P4 Smart 86 Box Interfaces
(click image to enlarge)

Wireless connectivity is provided by the ESP32-C6-MINI module, offering 2.4 GHz Wi-Fi 6 and Bluetooth 5 (LE) via SDIO. Power and programming are handled through a USB Type-C port, with an additional USB OTG Type-A connector available. Other onboard components include BOOT and RESET buttons, RTC battery header, expansion headers, and LED indicators.

Security features include secure boot, flash encryption, cryptographic accelerators, and a true random number generator. The board also supports AI voice interaction and integration with platforms such as DeepSeek.


ESP32-P4 Smart 86 Box Relay Connections
(click image to enlarge)

The ESP32-P4 Smart 86 Box has a physical layout and 86 mm wall-mount format similar to the Luckfox Core1106 Smart 86 Box. Both feature a 4-inch 720 × 720 IPS touchscreen with a GT911 touch controller, along with optional RS485, relay functions, and Ethernet connectivity.

The main difference is in the processor architecture, with the ESP32-P4 using a RISC-V dual-core and single-core configuration, while the Luckfox Core1106 is based on Rockchip’s ARM Cortex-A7 RV1106G2 or RV1106G3.


ESP32-P4 Smart 86 Box Variants
(click image to enlarge)

Documentation is already available through Waveshare’s Wiki, which provides instructions for using the board with Visual Studio Code and the ESP-IDF extension.

Further Information

The ESP32-P4 Smart 86 Box is available from Waveshare starting at $39.99.

(advertise here)


PLEASE COMMENT BELOW

Please comment here...