All News | Boards | Chips | Devices | Software | LinuxDevices.com Archive | About | Contact | Subscribe
Follow LinuxGizmos:
Twitter Facebook Pinterest RSS feed
*   get email updates   *

Pineboards Introduces Modulo Carrier Boards for Raspberry Pi CM5 and CM4

Feb 9, 2025 — by Giorgio Mendoza 706 views

Pineboards has introduced the Modulo4, Modulo5 Basic, and Modulo5 IO PoE+ carrier boards, adapting Raspberry Pi Compute Modules to the Raspberry Pi 5 form factor. These boards maintain compatibility with PCIe HATs, cases, and cooling solutions, with the Modulo5 IO PoE+ adding PoE+ support for network-powered operation.

Pineboards indicates that with the release of the Raspberry Pi Compute Module 5, ensuring compatibility with existing Raspberry Pi infrastructure was a key consideration. The Modulo5 IO PoE+ retains the form factor and connector layout of the official CM5 IO Board while incorporating a PoE+ module similar to that used in the Pi 5 HatDrive! PoE.

— ADVERTISEMENT —


Pineboards Modulo4
(click image to enlarge)

Both the Modulo4 and Modulo5 carrier boards adapt Compute Modules, with the Modulo4 supporting CM4 and the Modulo5 designed for CM5. The layout of both boards matches that of the Raspberry Pi 5, allowing integration with PCIe HATs and other accessories built for the Pi 5 ecosystem.

Pineboards Modulo5 Basic
(click image to enlarge)

The boards provide the same Raspberry Pi 5 form factor, ensuring that accessories such as the Active Cooler can be used without modification. The PCIe connector follows the Pi 5 specification, supporting existing PCIe HATs.

The I/O suite includes dual micro HDMI ports, Gigabit Ethernet, USB ports, and a power button, with the 40-pin GPIO header positioned identically to the Raspberry Pi 5 for compatibility with standard HATs.

The boards use impedance-controlled PCIe connectors, ensuring stable operation for applications requiring high-speed connectivity, such as storage or acceleration modules.

Pineboards Modulo5 Modulo5 IO PoE+
(click image to enlarge)

Due to space constraints, the Modulo4 and Modulo5 do not include a PoE header. Some connector placements differ slightly from the Raspberry Pi 5 but remain functionally compatible with official accessories.

PCIe performance depends on the Compute Module in use, with the CM4 limited to PCIe Gen 2, while the CM5 supports higher speeds depending on its configuration.

Specifications listed for the Module4, Modulo5 and Modulo IO PoE+:

Feature Modulo4 Modulo5 Basic Modulo5 IO PoE+
Gbit RJ45 Ethernet Yes Yes Yes (PoE+)
USB Type-A 2.0 4 2 No
USB Type-A 3.0 No 2 2
Micro HDMI 2 2 No
Full-size HDMI 2.0 No No 2
USB-C (Power In) Yes Yes No
USB-C (Power In/OTG) No No Yes
FPC PCIe Connector Yes Yes No
M.2 2280 M-key slot No No Yes
MIPI CSI 2 No No
MIPI CSI/DSI (4-lane) No 2 2
microSD Card Slot Yes Yes Yes
40-pin GPIO Header Yes Yes Yes
Raspberry Pi Debug Port Yes Yes No
Debug Port No No Yes
RTC Battery Header Yes Yes Yes
Fan Header Yes Yes No
PWM Fan Header No No Yes
Power Button No No Yes
Boot Mode Switch No No Yes
Status LEDs No No Yes

Further information

The Modulo4 is priced at €35, with the Modulo5 Basic also available at €35. The Modulo5 IO PoE+, which includes PoE+ functionality, is priced at €47. The Modulo4 and Modulo5 series are available through Pineboards’ store and will be distributed by partners such as ThePiHut, Welectron, and Botland. 

(advertise here)


PLEASE COMMENT BELOW

Please comment here...