All News | Boards | Chips | Devices | Software | LinuxDevices.com Archive | About | Contact | Subscribe
Follow LinuxGizmos:
Twitter Facebook Pinterest RSS feed
*   get email updates   *

Pimoroni Interstate 75 W RP2350 Based Driver for HUB75 LED Matrices

Feb 1, 2025 — by Giorgio Mendoza 341 views

The Interstate 75 W is a driver board designed for HUB75-style LED matrices and is powered by the RP2350 microcontroller. This board connects directly to HUB75 panels, offering a straightforward solution for creating LED displays for applications such as signage, data visualization, or interactive projects.

The board is built around the RP2350A microcontroller, featuring a dual-core Arm Cortex-M33 architecture running at up to 150 MHz with 520 KB of SRAM. It includes 4 MB of QSPI flash with support for XiP. Wireless connectivity is provided through the onboard Raspberry Pi RM2 module, which supports IEEE 802.11 b/g/n wireless LAN and Bluetooth, enabling integration with networked applications.

— ADVERTISEMENT —


Interstate 75 W bottom view
(click image to enlarge)

Power is supplied via a USB-C connector, which can also power connected LED panels, depending on their brightness settings. The board is equipped with screw terminals for secure power connections to LED panels. It includes three user buttons (A, B, and BOOT), a reset button, and an RGB LED, which can be used for status indication or additional functionality.

A Qw/ST connector is included, allowing for easy integration with Qwiic or STEMMA QT breakouts. Additional pins along the bottom edge provide access to I2C, analog, UART, and debug interfaces, enabling users to expand the board’s functionality according to project requirements.

Interstate 75 W pinout
(click image to enlarge)

The board supports programming with C/C++ and MicroPython, offering flexibility for different development environments. It is compatible with various sizes of HUB75 LED matrices, including 32×32, 32×64, 64×64, and 128×64 configurations.

The Interstate 75 W is available as a standalone unit or as part of a Starter Kit. The Starter Kit includes two 128×64 RGB LED matrix panels, power and data cables, magnetic feet with screw threads, and a USB cable. This provides the components necessary to assemble a display in either a 128×128 or 256×64 format.

Interstate 75 W (RP2350)
(click image to enlarge)

The board measures approximately 64.3 x 36 x 17 mm and is fully assembled, requiring no additional soldering. Documentation and firmware are available on Pimoroni’s GitHub repository.

Further information

The Interstate 75 W (RP2350) board is priced at £19.50 on the Pimoroni page.

(advertise here)


PLEASE COMMENT BELOW

One response to “Pimoroni Interstate 75 W RP2350 Based Driver for HUB75 LED Matrices”

  1. Jason says:

    Eep. I-75 runs north-south like all odd-numbered interstates in the US…

Please comment here...