MSI MS-CF27 3.5-inch SBC with Alder Lake-N, quad GbE, and triple display
May 3, 2026 — by Giorgio Mendoza 353 views
Following earlier platforms such as the MS-CF16 V3.0 and MS-CF19, MSI has introduced a new 3.5-inch SBC based on Intel Alder Lake-N, Twin Lake-N, and Amston Lake processors, continuing its focus on fanless, low-power, wide-voltage embedded systems with expanded connectivity and I/O.
Processor options include the Intel Processor N97, Core i3-N305, Amston Lake x7433RE, and Twin Lake-N N150, with configurations ranging from 6 W to 15 W TDP depending on the SKU. The platform uses a single DDR5-4800 SO-DIMM slot, supporting up to 32 GB of memory on selected variants.
— ADVERTISEMENT —
- N97 — 4C (2.0 – 3.6 GHz); 6 MB Cache; 12W TDP; Intel UHD Graphics
- i3-N305 — 8C (1.8 – 3.8 GHz); 6 MB Cache; 9W–15W TDP; Intel UHD Graphics
- x7433RE — 4C (up to 3.4 GHz); 6 MB Cache; 12W TDP; Intel UHD Graphics
- N150 — 4C/4T (0.8 – 3.6 GHz); 6 MB Cache; 6W TDP; Intel UHD Graphics

MS-CF27 block diagram
The board integrates Intel UHD Graphics and supports up to three independent displays through DisplayPort, HDMI, and LVDS or eDP interfaces. Display resolutions reach up to 4096 × 2304 at 60 Hz over DP, while HDMI supports up to 4K at 30 Hz.

MS-CF27 side view
Networking is handled by four Intel I226-V Gigabit Ethernet controllers, providing multiple LAN ports for routing, edge networking, or industrial communication use cases.
Additional I/O includes one USB 3.2 Gen 2 port, five USB 2.0 ports, and six serial interfaces, with two supporting RS-232/422/485 and four supporting RS-232.

MS-CF27 top view
Expansion options include an M.2 M-key slot for storage, along with M.2 B-key and E-key slots for additional connectivity modules. Storage is further supported through a SATA 3.0 interface.
The system also exposes GPIO, audio via a Realtek ALC897 codec, and a Fintek Super I/O controller for hardware monitoring and system management.

MSI MS-CF27
The board operates from a wide 12 V to 24 V DC input and is designed for fanless operation within a temperature range of -10°C to 60°C, depending on airflow conditions.
Specifications listed for the MS-CF27 include:
- Memory:
- Single-channel DDR5 4800 MHz
- 1× SO-DIMM slot (up to 32 GB depending on CPU)
- Storage:
- 1× M.2 2280 (M-Key, SATA)
- 1× SATA 3.0
- Networking:
- 4× Gigabit Ethernet (Intel I226-V)
- Expansion:
- 1× M.2 3042 (B-Key, USB 3.2 Gen 1)
- 1× M.2 2230 (E-Key, PCIe x1 + USB 2.0)
- Display:
- 1× DisplayPort (up to 4096 × 2304 @ 60 Hz)
- 1× HDMI (up to 3840 × 2160 @ 30 Hz)
- 1× LVDS/eDP (up to 1920 × 1200 @ 60 Hz)
- Triple independent display support
- Audio:
- HD audio via Realtek ALC897 codec
- I/O Interfaces:
- 6× COM ports (2× RS-232/422/485, 4× RS-232)
- 8-bit GPIO (4× GPI, 4× GPO)
- USB:
- 1× USB 3.2 Gen 2
- 5× USB 2.0
- Other Features:
- Fintek Super I/O controller
- Watchdog timer
- Power:
- 12–24 V DC-in
- Operating Temperature:
- −10 °C to +60 °C (with airflow)
- Mechanical:
- 146 × 102 mm (3.5-inch SBC)
Further Information
Please comment here...