All News | Boards | Chips | Devices | Software | LinuxDevices.com Archive | About | Contact | Subscribe
Follow LinuxGizmos:
Twitter Facebook Pinterest RSS feed
*   get email updates   *

Luckfox Core1106 Smart 86 Box with Touchscreen, RS485 Interface, and Optional Wireless Connectivity

May 4, 2025 — by Giorgio Mendoza 429 views

The Luckfox Core1106 Smart 86 Box is a development board designed for integration into standard 86-type wall enclosures. Based on the Luckfox-Pico-86-Panel series, it features Rockchip’s RV1106G2 or RV1106G3 processor and is intended for use in smart home interfaces and industrial control systems.

This device uses a single-core ARM Cortex-A7 processor with integrated NEON and FPU, similar to other LuckFox products like the Pico Ultra and Pico Pro/Max. The RV1106G3 variant includes a fourth-generation NPU capable of up to 1TOPS, while the RV1106G2 supports up to 0.5TOPS. The NPU is designed to handle INT4, INT8, and INT16 operations for AI workloads.

— ADVERTISEMENT —


Luckfox Core1106 Smart 86 Box Interfaces
(click image to enlarge)

A built-in ISP supports image processing functions such as HDR, WDR, and multi-level noise reduction. It supports image sensors up to 5 megapixels. According to the product page, the board also features adaptive video encoding that adjusts to scene content to reduce data rates, helping to manage storage and network load in camera-based systems.

Luckfox Core1106 Smart 86 Box Other Features
(click image to enlarge)

Multiple hardware configurations are available. These include options with 128MB or 256MB of DDR3L memory, 8GB of onboard eMMC storage, and variants with or without wireless connectivity. Models with wireless support include Wi-Fi 6 and Bluetooth 5.2/BLE.

A 4-inch IPS capacitive touchscreen is integrated, offering a resolution of 720×720 pixels, a 170-degree viewing angle, and 400 cd/m² brightness. The display uses an RGB666 interface and a GT911 touch controller, with a contrast ratio of 1000:1.

Luckfox Core1106 Smart 86 Box Dimensions
(click image to enlarge)

All variants include 10/100M Ethernet and RS485 interfaces, with built-in isolation and surge protection. Wireless-enabled models add dual-band Wi-Fi and Bluetooth support.

Additional features include a built-in microphone, speaker support for 8Ω 1W output, USB Type-C for power and firmware flashing, BOOT and RESET buttons, and a 14-pin multifunction header. Relay control and power input interfaces are also provided, with integrated power and signal isolation. The board accepts a DC input range of 6V to 30V. At the time of publication, a dedicated Wiki page for this product is not available.

Luckfox Core1106 Smart 86 Box
(click image to enlarge)

Further Information

The Luckfox Core1106 Smart 86 Box Development Board is priced starting at $35.99 for the base model with the RV1106G2 processor and no wireless connectivity. Models with wireless support are available for around $41.99. Additional information and purchasing options are available through the LuckFox product page and Waveshare.

(advertise here)


PLEASE COMMENT BELOW

Please comment here...