All News | Boards | Chips | Devices | Software | Archive | About | Contact | Subscribe
Follow LinuxGizmos:
Twitter Facebook Pinterest RSS feed
*   get email updates   *

"Extreme rugged" Mini-ITX SBC runs Linux on Bay Trail

Nov 12, 2015 — by Bill Traynor 1,636 views

Adlink’s Mini-ITX-BT-I SBC runs Linux on Intel Bay Trail SoCs, and offers 8GB RAM, dual GbE, and rich multimedia, plus MIL spec shake-and-bake ruggedness.

Adlink says its “AmITX-BT-I” single board computer targets applications that demand high-level processing and graphics performance, along with low power consumption. The “Extreme Rugged” board joins an assortment of competing Bay Trail-based Mini-ITX SBCs including Habey’s MITX-6771 and MITX-6770, Aaeon’s EMB-BTx series, Axiomtek’s MANO842, DFI’s BT160, and Portwell’s WADE-8078. Adlink’s board appears to be unique among the pack in its MIL spec-level shock and vibration resistance (see table farther below), and support for -40 to 85°C operating environments. Presumably, meeting these specs requires the use of carefully designed thermal management solutions.

Angled views of the AmITX-BT-I
(click images to enlarge)

The AmITX-BT-I can be ordered with any of Intel’s Atom E3800 series (Bay Trail) or related Intel Celeron N2930 or J1900 system-on-chips. The board’s dual-stacked SODIMM sockets accommodate up to 8GB of non-ECC DDR3L RAM, and there’s also an option for 8GB to 64GB of on-board eMMC storage.

AmITX-BT-I top view and block diagram
(click images to enlarge)

The board’s Bay Trail SoCs integrate Intel’s Generation7 HD Graphics, which offer compatibility with OpenGL 3.1, DirectX 11, OpenCL 1.1 standards and support for H.264, MPEG2, VC1, and VP8 hardware decode. Available display outputs include analog VGA, HDMI, and optional dual-channel 18/24-bit LVDS, with support for dual-independent, simultaneous display operation.

Other interfaces include a pair of Gigabit Ethernet ports, three helpings each of USB 3.0 and 2.0 ports, a pair of SATA 3Gb/s interfaces with one routing to an mSATA slot, analog and S/PDIF audio I/O, six serial ports, GPIO, and a PS2 port. The board’s PCIe expansion includes a PCIe x1 card slot along with a full-sized mini-PCIe slot with USB 2.0 and SIM card support.


Specifications listed for the AmITX-BT-I include:

  • Processor — choice of Intel “Bay Trail” Atom and Celeron SoCs with Gen7 Intel HD graphics:
    • Atom E3845 (4x cores @ 1.91GHz; 10W TDP)
    • Atom E3827 (2x cores @ 1.75GHz; 8W TDP)
    • Atom E3826 (2x cores @ 1.46GHz; 7W TDP)
    • Atom E3825 (2x cores @ 1.33GHz; 6W TDP)
    • Atom E3815 (1x core @ 1.46GHz; 5W TDP)
    • Celeron N2930 (4x cores @ 1.83GHz; 7.5W TDP)
    • Celeron J1900 (4x cores @ 2.00GHz; 10W TDP)
  • Memory — up to 8GB non-ECC DDR3L 1333MHz RAM via 2x SODIMM slots
  • Storage:
    • 2x SATA 3.0 Gbps (one shared with mSATA slot)
    • mSATA slot (includes USB 2.0 channel)
  • Optional 8-64GB eMMC SSD (soldered)
  • Display:
    • HDMI 1.3a — up to 2560 x 1600 x 24bpp @ 60 Hz
    • Analog VGA — up to 1920 x 1200 @ 60 Hz
    • LVDS — single/dual channel 24-bit, up to 1920 x 1200 @ 60 Hz; supports non-EDID type
  • Networking — 2x Gigabit Ethernet ports (Intel i211AT MAC/PHY) with wake-on-LAN
  • Other I/O:
    • USB — 4x USB 3.0 ports (via hub); 5x USB 2.0 ports (1x routed to Mini-PCIe and mSATA slots)
    • PS/2 port
    • 6x serial ports (3x RS-232 + 3x RS-232/422/485)
    • GPIO (10x in, 10x out)
    • Audio — analog line-out/mic-in; S/PDIF output
  • Expansion — 1x PCIe x1 slot; 1x mini-PCIe full-sized slot with USB 2.0 and SIM card support
  • Other features — watchdog timer, hardware monitor,
  • Operating temperature — 0 to 60°C (standard); -40 + 85°C (optional on Atom E38xx models)
  • Ruggedization — shock/vibration and HALT per IEC 60068-2-64 and IEC-60068-2-27, MIL-STD-202F Method 213B and Method 214A
  • Power — 12V DC and 5V DC (VSB) via internal header or external screw connector
  • Dimensions — 170 x 170mm; Mini-ITX form-factor
  • Operating systems — generic Linux 3.1.3 BSP available; Windows 7/8, WES 7/8

The AmITX-BT-I boots from an AMI EFI BIOS that provides embedded oriented features such as hardware monitor and a watchdog timer functions. Adlink also touts the board for its long product lifecycle support.

Further information

The Adlink Mini-ITX-BT-I SBC is currently shipping, at an unstated price. More details may be found at Adlink’s AmITX-BT-I product page.

(advertise here)

Print Friendly, PDF & Email

Please comment here...