All News | Boards | Chips | Devices | Software | LinuxDevices.com Archive | About | Contact | Subscribe
Follow LinuxGizmos:
Twitter Facebook Pinterest RSS feed
*   get email updates   *

ESP32-P4-EYE Vision Development Board with Camera, LCD, and Wireless Connectivity

Aug 16, 2025 — by Giorgio Mendoza 260 views

Espressif Systems ESP32-P4-EYE is a compact development kit in a mini digital camera form factor designed for real-time image processing and edge AI applications. Built on the ESP32-P4 SoC, the board targets smart cameras, IoT vision systems, and embedded HMI projects.

The ESP32-P4-EYE integrates a wide set of peripherals for multimedia development, including a MIPI-CSI interface for camera input, a 1.54-inch LCD display over SPI, a digital microphone, a MicroSD card slot, and USB 2.0 high-speed device mode.

— ADVERTISEMENT —


Additional features include a rotary encoder, onboard fill light, and a 20-pin female header for extending I/O.

ESP32-P4-EYE Block Diagram
(click image to enlarge)

According to related documentation from Espressif’s wiki, the camera module integrated into the ESP32-P4-EYE appears to be based on the OmniVision OV2710 image sensor. This 1/2.7-inch CMOS sensor supports full HD (1920 × 1080) video at 30 frames per second with 3 μm pixels and uses a rolling shutter.

ESP32-P4-EYE PCB Views
(click image to enlarge)

It delivers low-light sensitivity of 3300 mV/lux-sec, a signal-to-noise ratio of 39 dB, and a dynamic range of 69 dB, enabling operation from bright daylight down to under 15 lux. The sensor also provides programmable controls for exposure, gain, and frame rate, along with automatic features such as auto-exposure, auto-gain, auto-white balance, and lens correction.

ESP32-P4-EYE Female Header
(click image to enlarge)

Power options include USB Type-C via either the USB Device or Debug port, as well as a lithium battery connected through a dedicated battery header. A charging circuit with indicator LED is integrated, allowing standalone portable operation.

ESP32-P4-EYE Bottom & front View
(click image to enlarge)

The pilot batch of ESP32-P4-EYE boards ships in a 3D-printed enclosure and exposes most pins through headers for prototyping with jumper wires. Espressif provides documentation and software examples through the ESP-IDF framework, covering hardware setup, firmware flashing, and some application demos.

Further Information

The ESP32-P4-EYE is available now through Espressif’s official AliExpress store, priced at $48.13, or through Amazon for around $40.

(advertise here)


PLEASE COMMENT BELOW

Please comment here...