The Espressif ESP-Mosaico is an expandable smart-interaction development kit based on the ESP32-S31 microcontroller. The compact device integrates a 2.16-inch square touch display, audio hardware, motion and magnetic sensors, NAND storage, haptic feedback and dual expansion interfaces for HMI, edge voice and multimedia applications.

(more…)

GL.iNet has unveiled the Mango 2 (GL-MG1300), a compact travel router with dual-band Wi-Fi 5, Gigabit Ethernet and USB 3.0. The device supports WireGuard and OpenVPN, along with Ethernet, Wi-Fi repeater, USB tethering and USB cellular modem connections.

(more…)

OnLogic has added two SoftPLC-oriented industrial computers built around Intel Core Ultra processors and pre-configured CODESYS environments. The Helix 521-PLC targets low-profile deployments, while the larger Helix 524-PLC adds PCIe expansion with an available Hilscher netX fieldbus interface for industrial networking and real-time control applications.

(more…)

MINIX has listed the N304-AI, a compact mini PC based on Intel’s Core 3 304 processor with integrated Intel Graphics and an Intel AI Boost NPU. The system provides 16GB of LPDDR5X memory, dual M.2 NVMe storage, dual Gigabit Ethernet and triple 4K display support.

(more…)

Clicks is preparing the Communicator, a compact Android smartphone built around a physical keyboard and a 4.03-inch AMOLED touchscreen. The device uses MediaTek’s 4nm Dimensity 8300 platform, includes 12GB of RAM and 256GB of storage, and is designed to operate either as a standalone phone or alongside another smartphone.

(more…)

Hat & Hammer has launched a Crowd Supply campaign for OpenMote, a programmable universal remote built around an ESP32-S3-WROOM-1 module. The device supports infrared transmission and reception, Bluetooth LE, Wi-Fi, motion sensing, audio, haptic feedback, and Qwiic/STEMMA QT expansion, while also targeting smart-home and game-controller applications.

(more…)

MSI has detailed the MS-C9ZA, a compact fanless Edge AI Box PC based on NVIDIA’s Jetson Orin Nano 8GB module. The industrial system provides dual Gigabit Ethernet, 256GB SSD storage, M.2 NVMe expansion, isolated GPIO, CAN, UART and I2C interfaces, along with optional IEEE 802.3af PSE, 5G, and out-of-band management expansion.

(more…)

Olimex’s Neo6502kbd is an all-in-one version of the Neo6502 retro-computing platform built into a USB keyboard enclosure. The design combines a real W65C02 processor with an RP2040 and adds four USB host ports, HDMI/DVI output, UEXT expansion, separate USB-C ports for power and programming, an integrated speaker, and a power switch.

(more…)

Elecrow’s ThinkNode M9 is a handheld LoRa communication terminal built around an ESP32-S3 processor and Semtech LR1110 transceiver. The device includes a 2.4-inch color display, full QWERTY keyboard, GNSS positioning, Wi-Fi and Bluetooth connectivity, USB Type-C, and a 2300mAh battery.

(more…)

MSI has detailed the XpertStation WS300T60L, a tower workstation based on NVIDIA’s DGX Station architecture and GB300 Grace Blackwell Ultra platform. The system is aimed at AI development, data science, inference, AI agents, and physical AI workloads, with a 72-core Arm processor, Blackwell Ultra GPU, up to 748GB of coherent memory, and dual 400GbE connectivity.

(more…)

A recent Crowd Supply campaign features the Firehat, an open-source FireWire HAT designed for PCIe-capable single-board computers including the Raspberry Pi 5 and Radxa ROCK 2F. The board uses a VIA VT6315N IEEE 1394 controller and targets direct DV and HDV capture from older digital camcorders and tape decks using Linux.

(more…)

Nordic Semiconductor’s nRF93M1 Development Kit is now available through multiple distributors, providing a platform for evaluating the company’s nRF93M1 LTE Cat 1 bis cellular module. The board combines the modem with an nRF54L15 host MCU and includes USB-C, onboard J-Link debugging, power-measurement support, and a preloaded SIM card.

(more…)

Crowd Supply recently featured the USBridge-KVM 2.0, a compact IP-KVM designed for remote system administration, debugging, and bare-metal recovery. The device provides HDMI video capture, USB keyboard and mouse emulation, virtual media, hardware power control, BIOS text recognition, and an integrated display while operating independently of the target computer’s operating system.

(more…)

Apollo Automation has launched the ESPHome Starter Kit, a modular smart-home development platform built around an ESP32-C6 board and designed to let users create ESPHome devices without soldering, breadboards, or writing code. The kit operates locally and can be used independently or integrated with Home Assistant.

(more…)