All News | Boards | Chips | Devices | Software | LinuxDevices.com Archive | About | Contact | Subscribe
Follow LinuxGizmos:
Twitter Facebook Pinterest RSS feed
*   get email updates   *

Banana Pi Previews BPI-R4 Pro Router Board with MediaTek MT7988A and Wi-Fi 7 Support

May 30, 2025 — by Giorgio Mendoza 829 views

Banana Pi has revealed early details about the BPI-R4 Pro, an upcoming router board powered by the MediaTek MT7988A (Filogic 880). Designed as a successor to the BPI-R4, it targets high-speed wireless and wired networking for applications such as Wi-Fi 7 access points and multi-gigabit gateways.

The BPI-R4 Pro features a quad-core Arm Cortex-A73 CPU running at 1.8GHz, with either 4GB or 8GB of DDR4 RAM. It includes 8GB of eMMC storage, 256MB of SPI-NAND flash, and a microSD card slot for additional storage.

— ADVERTISEMENT —



BPI-R4 Pro Bottom View
(click image to enlarge)

MediaTek’s MT7988A supports tri-band Wi-Fi 7 across the 2.4GHz, 5GHz, and 6GHz bands. Wireless capabilities include 320 MHz bandwidth, 4096-QAM, Multi-Link Operation (MLO), Multi-RU, and Automatic Frequency Coordination (AFC). The onboard Tunnel Offload Processor System (TOPS) accelerates tunneling protocol processing for improved gateway performance.


BPI-R4-NIC-BE14 Wi-Fi7 Module
(click image to enlarge)

Networking interfaces include four 2.5G Ethernet ports and two 10G ports offered via both SFP and RJ45 connectors for WAN and LAN, configured as combo ports. The board also provides a 1G RJ45 LAN port and a 1G LAN interface through an FPC connector.

Expansion options include two M.2 M-Key slots for NVMe SSDs, three M.2 B-Key slots with USB 3.2 support for 5G modules, and two mini PCIe slots with PCIe 3.0 lanes for Wi-Fi cards. Additional connectivity is available through USB 3.2, USB 2.0, a USB Type-C debug console, and GPIO headers.


BPI-R4 Pro Top View
(click image to enlarge)

Wi-Fi 6E and Wi-Fi 7 modules such as the AW7916-NPD and BPI-R4-NIC-BE14 are supported.

For context, the BPI-R4-NIC-BE14 is a dedicated Wi-Fi 7 module designed to pair with the R4 Pro. Measuring 82 by 51 millimeters, it is based on the MediaTek MT7995AV chipset and supports IEEE 802.11a/b/g/n/ac/ax/be standards. It enables tri-band, triple-concurrent operation across the 2.4GHz, 5GHz, and 6GHz bands, with up to 2×2 MIMO at 2.4GHz and 3×3 MIMO at both 5GHz and 6GHz.

The MT7995AV includes a RISC-V MCU for protocol handling and Wi-Fi offloading, and supports advanced features such as 320 MHz bandwidth, MU-MIMO, MU-OFDMA, and beamforming. The module communicates over dual PCIe 3.0 lanes and is designed for high-throughput wireless performance with PHY rates up to 13.7 Gbps.

Further Information

Accessories including 10G SFP modules and wireless cards are available from Banana Pi sellers on platforms such as AliExpress and Taobao. However, availability of the BPI-R4 Pro remains unconfirmed at the time of publication. Additional documentation and updates can be found on the official Banana Pi wiki.

(advertise here)


PLEASE COMMENT BELOW

Please comment here...