All News | Boards | Chips | Devices | Software | LinuxDevices.com Archive | About | Contact | Subscribe
Follow LinuxGizmos:
Twitter Facebook Pinterest RSS feed
*   get email updates   *

$6.80 LILYGO T7-C6 Board Leverages RISC-V Single-Core Processor & 4MB Integrated Flash Memory

Dec 20, 2024 — by Giorgio Mendoza 346 views

The LILYGO T7-C6 is a compact development board built around the ESP32-C6-MINI-1 module, offering versatile features designed for IoT and wireless communication applications. The board is available with either an onboard PCB antenna or an external antenna and supports modern wireless protocols, including 2.4 GHz Wi-Fi 6, Bluetooth 5 (LE), and IEEE 802.15.4.

The ESP32-C6-MINI-1 integrated into the LILYGO T7-C6 is a 32-bit RISC-V single-core microprocessor capable of running at up to 160 MHz. It includes 4MB of onboard flash memory, 320 KB of ROM, 512 KB of high-performance SRAM, and 16 KB of low-power SRAM for processing and memory management.

— ADVERTISEMENT —


ESP32-C6 block diagram
(click image to enlarge)

Its Wi-Fi supports MCS0 to MCS9 modulation schemes, uplink and downlink OFDMA, and downlink MU-MIMO, with Beamformee functionality enhancing signal quality. Bluetooth LE 5.3 certification enables advanced features like Bluetooth mesh networking, with data speeds ranging from 125 Kbps to 2 Mbps.

The board is also compliant with the IEEE 802.15.4-2015 protocol, supporting OQPSK PHY in the 2.4 GHz band, with a data rate of 250 Kbps, along with Thread 1.3 and Zigbee 3.0.

LILYGO T7-C6
(click image to enlarge)

Its onboard Qwiic 4-pin interface supports external modules and sensors, complemented by Boot and Reset buttons for firmware programming and troubleshooting. Other features include a switch and reverse polarity protection for power and battery connections, along with support for USB charging at 5V and 500mA for power management.

T7-C6 pinout
(click image to enlarge)

With compact dimensions of 41 x 27 mm, the T7-C6 supports programming in multiple languages such as C/C++, MicroPython, and Lua, although the GitHub repository for this product notes that the ESP32-C6 can currently only be programmed using the Arduino IDE.

Further information

The LILYGO T7-C6 is available for $6.80 in two variants, the External Antenna Module N1 and the Built-in Antenna Module N4.

(advertise here)


PLEASE COMMENT BELOW

Please comment here...